Preparing Items for Decoupage

Wood

Evenly sand any rough spots. Fill rough spots and holes with wooden filler and then sand. Wipe with a damp sponge. If you want a stained track record, use a h2o-soluble, alcohol-based wooden stain. You may will need to seal the wooden.

You can use your cutout specifically onto untreated wooden, but it truly is superior to use a sealer. In advance of sanding wooden paint a base coat initial as the h2o-based paint lifts the fibers of wooden way from the surface area so when you sand the paint the fibers are simply eradicated. The initial coat of paint highlights imperfections that you can proper with filler.

When utilizing a wooden base, don’t forget that oil and h2o you should not combine. The most widespread decoupage glazes are h2o-based and will not adhere adequately to wooden that has been stained with an oil-based stain.

If you’ve got stained wooden with an oil-based stain, you will need to seal it with an oil-based sealer. If you want to decoupage a piece of outdated furnishings and usually are not guaranteed of the finish, obtain an inconspicuous location to examination your glaze.

Glass

Wash your glass product with soap and h2o, rinse thoroughly, and wipe dry. Wipe the surface area with rubbing alcohol or vinegar and let to dry right before operating on the surface area. Never contact the surface area the moment it has been cleaned as oil from fingers can result in your visuals to not seal adequately.

You will need to be excess watchful to clear away any extra glue from the glass surface area, the moment your prints are applied. It is really also extremely essential to do the job on a cleanse surface area. When utilizing PVA glue on glass, increase a fall of glycerin to lengthen the drying time. When you have applied your cutout to the glass surface area and allowed the glue to dry, you can clear away any glue by wiping the glass with a window cleaner. Never use glue to the image, only to the glass. Never fret about leaving way too much glue among the glass and the image as it will dry clear. The extra glue you do the job with, the less difficult it is to get rid of bubbles. Similarly, it truly is Alright to leave a slender film of glue both of those on the glass and the back again of the image.

Spray a modest volume on a damp sponge or cloth and clear away any extra glue from the glass. Cotton swabs do the job nicely to clear away glue from modest spots.

Plastic

To decoupage on plastic, you will need to roughen the plastic initial with sandpaper. This will give it some tooth with which to get and supply a restricted seal. You will will need to let excess drying and excess curing time than with other surfaces. Dry to the contact is just not more than enough. Evenly push your finger in an space that will not exhibit to examination it if probable. If not, let numerous days for drying to be on the protected facet. Preserve the item guarded from dust whilst it truly is drying.

Supply by Karen LeBlanc

Source: Preparing Items for Decoupage